Tap - materials specifications
Steels
Non-Alloy General Structural Steel (Base Steel EN 10025)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.0032 | 450 | S250GT / St 34-2 |
| 1.0034 | 500 | S250G2T / RSt 34-2 |
| 1.0120 | 500 | S235JRC / St 37 |
| 1.0116 | 510 | S235J2G3 / St 37-3 |
| 1.0036 | 510 | S235JRG1 + CR / St 37 2 |
| 1.0037 | 510 | S235JR / St 37-2 |
| 1.0038 | 510 | S235JRG2 / RSt 37-2 |
| 1.0114 | 510 | S235J0 / St 37-3 U |
| 1.0140 | 520 | S275JOC / St 42 |
| 1.0035 | 540 | S185 / St 33 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.0044 | 580 | S275JR / St 44-2 |
| 1.0144 | 580 | S275J2G3 + CR / St 44-3 |
| 1.0181 | 580 | UZSt42-2 |
| 1.0531 | 600 | S550GD / St 50 |
| 1.0050 | 660 | E295 / St 50-2 |
| 1.0553 | 680 | S355J0 / St 52-3 U |
| 1.0570 | 680 | S355J2G3+CR / St 52-3 |
| 1.0060 | 780 | E335 / St 60-2 |
| 1.0070 | 900 | E360 / St 70-2 |
| 1.0633 | 900 | E630GC / ZSt 70-2 |
Magnetic Soft Iron (acc. to DIN 17405)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.1011 | 400 | RFe160 |
| 1.1013 | 400 | RFe100 |
| 1.1014 | 400 | RFe80 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.1015 | 400 | RFe60 |
| 1.1017 | 400 | RFe20 |
| 1.1018 | 400 | RFe12 |
Boiler Plates (acc. to DIN EN 10028-1+2, DIN 17155)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.0345 | 480 | P235GH / H I |
| 1.0425 | 530 | P265GH / H II |
| 1.0435 | 600 | P285NH / H III |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.0445 | 600 | P295NH / H IV |
| 1.0352 | 600 | Ship boiler plate grade 1 (H I) |
| 1.0454 | 600 | Ship boiler plate grade 2 (H II) |
Fine Grained Structural Steel (acc. to DIN EN 10113-1+2, DIN 17102)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.0461 | 480 | S255N / StE 255 |
| 1.0486 | 510 | P275N / StE 285 |
| 1.0505 | 560 | P315N / StE 315 |
| 1.0562 | 630 | P355N / StE 355 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.8900 | 650 | S380N / StE 380 |
| 1.8902 | 680 | S420N / StE 420 |
| 1.8905 | 720 | P460N / StE 460 |
| 1.8907 | 780 | S500N / StE 500 |
Fine Grained Steels for Cold Pressing (acc. to DIN EN 10149-2/-3)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.0974 | 540 | S340MC / QStE 340 TM |
| 1.0975 | 580 | S340NC / QStE 340 N |
| 1.0978 | 590 | S380MC / QStE 380 TM |
| 1.0979 | 640 | S380NC / QStE 380 N |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.0983 | 700 | S460NC / QStE 460 N |
| 1.0985 | 730 | S500NC / QStE 500 N |
| 1.0987 | 750 | S550NC / QStE 550 N |
Free-cutting Steel, untreated, bright turned (acc. to DIN EN 10087, DIN 1651)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.0711 | 520 | 9S20K |
| 1.0721 | 530 | 10S20 / 10 S 20 |
| 1.0722 | 530 | 10SPb20 / 10 SPb 20 |
| 1.0715 | 570 | 11SMn30 / 9 SMn 28 |
| 1.0718 | 570 | 11SMnPb30 / 9 SMnPb 28 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.0723 | 570 | 15S22 / 15 S 20 |
| 1.0736 | 590 | 11SMn37 / 9 SMn 36 |
| 1.0737 | 590 | 11SMnPb37 / 9SMnPb36 |
| 1.0726 | 660 | 35S20 / 35 S 20 |
| 1.0727 | 760 | 46S20 / 45 S 20 |
Free-cutting Steel, cold drawn (acc. to DIN EN 10087, DIN 1651)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.0711 | 750 | 9S20K |
| 1.0721 | 780 | 10S20 / 10 S 20 |
| 1.0722 | 780 | 10SPb20 / 10 SPb 20 |
| 1.0736 | 800 | 11SMn37 / 9 SMn 36 |
| 1.0737 | 800 | 11SMnPb37 / 9SMnPb36 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.0715 | 810 | 11SMn30 / 9 SMn 28 |
| 1.0718 | 810 | 11SMnPb30 / 9 SMnPb 28 |
| 1.0723 | 810 | 15S22 / 15 S 20 |
| 1.0726 | 880 | 35S20 / 35 S 20 |
| 1.0727 | 980 | 45S20 / 45 S 20 |
Free-cutting Steel, quenched and tempered (acc. to DIN EN 10087, DIN 1651)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.0726 | 980 | 35S20 / 35 S 20 |
| 1.0727 | 980 | 45S20 / 45 S 20 |
| 1.0728 | 980 | 60S22 / 60 S 20 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.0756 | 980 | 35SPb20 / 35 SPb 20 |
| 1.0757 | 980 | 45SPb20 / 45 SPb 20 |
| 1.0758 | 980 | 60SPb22 / 60 SPb 20 |
Case Hardening Steel (in condition of delivery) (acc. to DIN EN 10084, DIN 17210)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.1121 | 445 | C10E / Ck 10 |
| 1.0301 | 445 | C10 / C 10 |
| 1.0401 | 485 | C15 / C 15 |
| 1.1140 | 485 | C15R / Cm 15 |
| 1.1141 | 485 | C15E / Ck 15 |
| 1.7012 | 575 | 13Cr2 / EC30 (13 Cr 2) |
| 1.7015 | 590 | 15Cr3 / EC60 (15 Cr 3) |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.7016 | 590 | 17Cr3 / 17 Cr 3 |
| 1.7027 | 665 | 20Cr4 / 20 Cr 4 |
| 1.7131 | 700 | 16MnCr5 / EC80 (16 MnCr 5) |
| 1.7147 | 730 | G20MnCr5 / 20 MnCr 5 |
| 1.6587 | 770 | 17CrNiMo6 (18CrNiMo7-6) |
| 1.5860 | 825 | 14NiCr18 / 14 NiCr 18 |
Case Hardening Steel (after case hardening) (acc. to DIN EN 10084, DIN 17210)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.1121 | 780 | C10E / Ck 10 |
| 1.0301 | 800 | C10 / C 10 |
| 1.0401 | 880 | C15 / C 15 |
| 1.1140 | 880 | C15R / Cm 15 |
| 1.1141 | 880 | C15E / Ck 15 |
| 1.7012 | 930 | 13Cr2 / EC30 (13 Cr 2) |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.7016 | 1030 | 17Cr3 / 17 Cr 3 |
| 1.7027 | 1030 | 20Cr4 / 20 Cr 4 |
| 1.7131 | 1180 | 16MnCr5 / EC80 (16 MnCr 5) |
| 1.6587 | 1320 | 17CrNiMo6 (18CrNiMo7-6) |
| 1.7147 | 1370 | G20MnCr5 / 20 MnCr 5 |
| 1.5860 | 1420 | 14NiCr18 / 14 NiCr 18 |
Steel for Cold Extrusion and Cold Heading (Sheet Metal for Deep Forming) (acc. to DIN 1654, ISO 4954)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.1132 | 490 | C15C / Cq 15 |
| 1.1152 | 540 | C22C / Cq22 |
| 1.1172 | 590 | C35C / Cq 35 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.1192 | 600 | C45C / Cq 45 |
| 1.5919 | 610 | 15CrNi6 / 15 CrNi 6 |
Carbon Steel, Unalloyed Quality Steel (soft annealed) (acc. to DIN EN 10083-1+2, DIN 17200)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.0402 | 525 | C22 / C 22 |
| 1.1151 | 525 | C22E / Ck 22 |
| 1.0528 | 570 | C30 / C 30 |
| 1.1178 | 570 | C30E / Ck 30 |
| 1.0501 | 615 | C35 / C 35 |
| 1.1180 | 615 | C35R / Cm 35 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.1181 | 615 | C35E / Ck 35 |
| 1.0503 | 700 | C45 / C 45 |
| 1.1191 | 700 | C45E / Ck 45 |
| 1.0535 | 770 | C55 / C 55 |
| 1.0601 | 815 | C60 / C 60 |
| 1.1221 | 815 | C60E / Ck 60 |
Carbon Steel, Unalloyed Quality Steel (acc. to DIN EN 10083-1+2, DIN 17200)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.1151 | 700 | C22E / Ck 22 |
| 1.0528 | 750 | C30 / C 30 |
| 1.1178 | 750 | C30E / Ck 30 |
| 1.0501 | 780 | C35 / C 35 |
| 1.1180 | 780 | C35R / Cm 35 |
| 1.1181 | 780 | C35E / Ck 35 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.0503 | 850 | C45 / C 45 |
| 1.1191 | 850 | C45E / Ck 45 |
| 1.0535 | 900 | C55 / C 55 |
| 1.0601 | 1000 | C60 / C 60 |
| 1.1221 | 1000 | C60E / Ck 60 |
Heat-treatable Steel, alloyed, High-grade Steel, Quenched and Tempered Steel (soft annealed) (acc. to DIN EN 10083-1+2, DIN 17200)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.1170 | 750 | 28Mn6 / 28 Mn 6 |
| 1.7006 | 750 | 46Cr2 / 46 Cr 2 |
| 1.7035 | 810 | 41Cr4 / 41 Cr 4 |
| 1.7218 | 810 | G25CrMo4 / GS-25 CrMo 4 |
| 1.7220 | 810 | 34CrMo4 / GS-26 CrMo4 |
| 1.7225 | 810 | 42CrMo4 / 42 CrMo 4 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.7228 | 835 | 50CrMo4 / 50 CrMo 4 |
| 1.7361 | 835 | 32CrMo12 / 32 CrMo 12 |
| 1.6580 | 835 | 30CrNiMo8 / 30 CrNiMo 8 |
| 1.7707 | 835 | 30CrMoV9 / 30 CrMoV 9 |
| 1.5864 | 835 | 35NiCr18 / 35 NiCr 18 |
| 1.8161 | 835 | 58CrV4 / 58 CrV 4 |
Heat-treatable Steel, alloyed, High-grade Steel, Quenched and Tempered Steel (heat-treated) (acc. to DIN EN 10083-1+2, DIN 17200)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.1170 | 950 | 28Mn6 / 28 Mn 6 |
| 1.7006 | 1000 | 46Cr2 / 46 Cr 2 |
| 1.7035 | 1100 | 41Cr4 / 41 Cr 4 |
| 1.7218 | 1100 | G25CrMo4 / GS-25 CrMo 4 |
| 1.7220 | 1200 | 34CrMo4 / GS-26 CrMo4 |
| 1.7225 | 1300 | 42CrMo4 / 42 CrMo 4 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.7228 | 1300 | 50CrMo4 / 50 CrMo 4 |
| 1.7361 | 1420 | 32CrMo12 / 32 CrMo 12 |
| 1.6580 | 1450 | 30CrNiMo8 / 30 CrNiMo 8 |
| 1.7707 | 1450 | 30CrMoV9 / 30 CrMoV 9 |
| 1.5864 | 1470 | 35NiCr18 / 35 NiCr 18 |
| 1.8161 | 1570 | 58CrV4 / 58 CrV 4 |
Ball and Roller Bearing Steel (annealed, before Hardening) (acc. to DIN 17230, ISO 683-17)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.3501 | 900 | 100Cr2 (W1) |
| 1.3503 | 900 | 105Cr4 (W2) |
| 1.3505 | 900 | 100Cr6 (W3) |
| 1.3520 | 950 | 100CrMn6 (W4) |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.3536 | 950 | 100CrMo7-3 (W5) |
| 1.3543 | 1000 | X102CrMo17 |
| 1.3549 | 1000 | X89CrMoV18-1 |
Ball and Roller Bearing Steel (hardened and tempered to min. 200°C) (acc. to DIN 17230, ISO 683-17)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.3549 | (60HRc) | X89CrMoV18-1 |
| 1.3501 | (61HRc) | 100Cr2 (W1) |
| 1.3520 | (61HRc) | 100CrMn6 (W4) |
| 1.3543 | (62HRc) | X102CrMo17 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.3503 | (62HRc) | 105Cr4 (W2) |
| 1.3505 | (62HRc) | 100Cr6 (W3) |
| 1.3536 | (62HRc) | 100CrMo7-3 (W5) |
Nitriding Steel, soft annealed (acc. to DIN 17211, ISO 683-10)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.8504 | 730 | 34CrAl6 / 34 CrAl 6 |
| 1.8506 | 730 | 34CrAlS5 / 34 CrAlS 5 |
| 1.8507 | 835 | 34CrAlMo5 / 34 CrAlMo 5 |
| 1.8515 | 835 | 31CrMo12 / 31 CrMo 12 |
| 1.8519 | 835 | 31CrMoV9 / 31 CrMoV 9 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.8521 | 835 | 15CrMoV5-9 / 15 CrMoC 5 9 |
| 1.8550 | 835 | 34CrAlNi7 / 34 CrAlNi 7 |
| 1.8509 | 885 | 41CrAlMo7 / 41 CrAlMo 7 |
| 1.8523 | 885 | 39CrMoV13-9 / 39 CrMoV 13 9 |
Nitriding Steel, heat-treated (acc. to DIN 17211, ISO 683-10)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.8504 | 780 | 34CrAl6 / 34 CrAl 6 |
| 1.8506 | 930 | 34CrAlS5 / 34 CrAlS 5 |
| 1.8509 | 980 | 41CrAlMo7 / 41 CrAlMo 7 |
| 1.8507 | 1000 | 34CrAlMo5 / 34 CrAlMo 5 |
| 1.8515 | 1130 | 31CrMo12 / 31 CrMo 12 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.8519 | 1230 | 31CrMoV9 / 31 CrMoV 9 |
| 1.8521 | 1230 | 15CrMoV5-9 / 15 CrMoC 5 9 |
| 1.8523 | 1420 | 39CrMoV13-9 / 39 CrMoV 13 9 |
| 1.8550 | 1470 | 34CrAlNi7 / 34 CrAlNi 7 |
Carbon Tool Steel, soft annealed (acc. to DIN 17350, ISO 4957)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.1820 | 570 | C 55 W |
| 1.1520 | 640 | C70U / C 70 W 1 |
| 1.1525 | 640 | C80U / C 80 W1 |
| 1.1545 | 640 | C105U / C 105 W1 |
| 1.1645 | 640 | C 105 W2 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.1730 | 640 | C45U / C 45 W |
| 1.1554 | 660 | C110U / C 110 W |
| 1.1740 | 700 | C60U / C 60 W |
| 1.1744 | 730 | C 67 W |
| 1.1573 | 780 | C135U / C 135 W |
Carbon Tool Steel, hardened and tempered Hardness penetration 2,5 - 5,0 mm (acc. to DIN 17350, ISO 4957)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.1730 | (58HRc) | C45U / C 45 W |
| 1.1740 | (58HRc) | C60U / C 60 W |
| 1.1820 | (60HRc) | C 55 W |
| 1.1830 | (60HRc) | C85U / C 85 W |
| 1.1744 | (60HRc) | C 67 W |
| 1.1750 | (62HRc) | C 57 W |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.1520 | (63HRc) | C70U / C 70 W 1 |
| 1.1525 | (64HRc) | C80U / C 80 W1 |
| 1.1545 | (65HRc) | C105U / C 105 W1 |
| 1.1645 | (65HRc) | C 105 W2 |
| 1.1554 | (65HRc) | C110U / C 110 W |
| 1.1573 | (65HRc) | C135U / C 135 W |
Cold Work Tool Steel before hardening, soft annealed (acc. to DIN 17350, ISO 4957)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.2056 | 710 | 90Cr3 / 90 Cr 3 |
| 1.2162 | 720 | 21MnCr5 / 21 MnCr 5 |
| 1.2248 | 725 | 38SiCrV6 |
| 1.2127 | 740 | 105MnCr4 / 105 MnCr 4 |
| 1.2208 | 740 | 31CrV2 / 31 CrV 3 |
| 1.2243 | 740 | 61CrSiV5 |
| 1.2249 | 740 | 45SiCrV6 |
| 1.2842 | 740 | 90MnCrV8 / 90 MnCrV 8 |
| 1.2083 | 760 | X42Cr13 / X 42 Cr 13 |
| 1.2101 | 760 | 62SiMnCr4 |
| 1.2103 | 760 | 58SiCr8 |
| 1.2241 | 760 | 51CrV4 / 51 CrMnV 4 |
| 1.2242 | 760 | 59CrV4 |
| 1.2519 | 770 | 110WCrV5 / 110 WCrV 5 |
| 1.2109 | 780 | 125CrSi5 / 125 CrSi 5 |
| 1.2201 | 780 | G-X 165 CrV12 / X 165 CrV 12 |
| 1.2303 | 780 | 100CrMo5 / 100 CrMo 5 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.2312 | 780 | 40CrMnMoS8-6 / 40 CrMnMoS 8 6 |
| 1.2363 | 780 | X100CrMoV5-1 / X 100 CrMoV 5 1 |
| 1.2510 | 780 | 100MnCr4 / 100 MnCr 4 |
| 1.2319 | 810 | X64CrMo14 |
| 1.2823 | 820 | 70Si7 / 70 Si 7 |
| 1.2080 | 850 | X210Cr12 / X 210 Cr 12 |
| 1.2316 | 850 | X36CrMo17 / X 36 CrMo 17 |
| 1.2379 | 850 | X155CrVMo12-1 / X 155 CrVMo 12 1 |
| 1.2436 | 850 | X210CrW12 / X 210 CrW 12 |
| 1.2601 | 850 | X165CrMoV12 / X 165 CrMoV 12 |
| 1.2745 | 850 | 14NiCr18 / 14 NiCr 18 |
| 1.2767 | 880 | X45NiCrMo4 / X 45 NiCrMo 4 |
| 1.2880 | 880 | X165CrCoMo12 / G-X 165 CrCoMo 12 |
| 1.2884 | 880 | X210CrCoW12 / X 210 CrCoW 12 |
| 1.2361 | 900 | X91CrMoV18 |
| 1.2562 | 900 | 142WV13 / 142 WV 13 |
Cold Work Tool Steel hardened < 62 HRc (acc. to DIN 17350, ISO 4957)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.2316 | (49HRc) | X36CrMo17 / X 36 CrMo 17 |
| 1.2312 | (51HRc) | 40CrMnMoS8-6 / 40 CrMnMoS 8 6 |
| 1.2303 | (55HRc) | 100CrMo5 / 100 CrMo 5 |
| 1.2083 | (56HRc) | X42Cr13 / X 42 Cr 13 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.2823 | (59HRc) | 70Si7 / 70 Si 7 |
| 1.2745 | (61HRc) | 14NiCr18 / 14 NiCr 18 |
| 1.2162 | (62HRc) | 21MnCr5 / 21 MnCr 5 |
Cold Work Tool Steel hardened and tempered to min. 200°C (acc. to DIN 17350, ISO 4957)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.2842 | (60HRc) | 90MnCrV8 / 90 MnCrV 8 |
| 1.2379 | (61HRc) | X155CrVMo12-1 / X 155 CrVMo 12 1 |
| 1.2601 | (61HRc) | X165CrMoV12 / X 165 CrMoV 12 |
| 1.2056 | (62HRc) | 90Cr3 / 90 Cr 3 |
| 1.2080 | (62HRc) | X210Cr12 / X 210 Cr 12 |
| 1.2109 | (62HRc) | 125CrSi5 / 125 CrSi 5 |
| 1.2127 | (62HRc) | 105MnCr4 / 105 MnCr 4 |
| 1.2363 | (62HRc) | X100CrMoV5-1 / X 100 CrMoV 5 1 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.2436 | (62HRc) | X210CrW12 / X 210 CrW 12 |
| 1.2510 | (62HRc) | 100MnCr4 / 100 MnCr 4 |
| 1.2519 | (62HRc) | 110WCrV5 / 110 WCrV 5 |
| 1.2880 | (62HRc) | X165CrCoMo12 / G-X 165 CrCoMo 12 |
| 1.2201 | (62HRc) | G-X 165 CrV12 / X 165 CrV 12 |
| 1.2562 | (62HRc) | 142WV13 / 142 WV 13 |
| 1.2884 | (62HRc) | X210CrCoW12 / X 210 CrCoW 12 |
Hot Work Tool Steel before hardening, soft annealed (acc. to DIN 17350, ISO 4957)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.2082 | 680 | X20Cr13 / X 20 Cr 13 |
| 1.2311 | 780 | 40CrMnMo7 / 40 CrMnMo 7 |
| 1.2343 | 790 | X38CrMoV5-1 / X 38 CrMoV 5 1 |
| 1.2344 | 790 | X40CrMoV5-1 / X 40 CrMoV 5 1 |
| 1.2367 | 790 | X38CrMoV5-3 / X 38 CrMoV 5 3 |
| 1.2743 | 790 | 60NiCrMoV12-4 / 60 NiCrMoV 12 4 |
| 1.2567 | 810 | 30WCrV17-2 / X 30 WCrV 5 3 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.2713 | 810 | G55NiCrMoV6 / 55 NiCrMoV 6 |
| 1.2889 | 810 | X45CoCrMoV5-5-3/X 45 CoCrMoV 5 5 3 |
| 1.2714 | 850 | 56NiCrMoV7 / G-56 NiCrMoV 7 |
| 1.2678 | 880 | X45CoCrWV5-5/X 45 CoCrWV 5 5 |
| 1.2766 | 880 | 35NiCrMo16 / 35 NiCrMo 16 |
| 1.2622 | 910 | X60WCrMoV9-4 / X 60 WCrMoV 9 4 |
Hot Work Tool Steel (after Hardening) (acc. to DIN 17350, ISO 4957)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.2082 | 1370 | X20Cr13 / X 20 Cr 13 |
| 1.2713 | 1420 | 55NiCrMoV6 / 55 NiCrMoV 6 |
| 1.2311 | 1470 | 40CrMnMo7 / 40 CrMnMo 7 |
| 1.2743 | 1570 | 60NiCrMoV12-4 / 60 NiCrMoV 12 4 |
| 1.2766 | 1620 | 35NiCrMo16 / 35 NiCrMo 16 |
| 1.2889 | 1620 | X45CoCrMoV5-5-3/X 45 CoCrMoV 5 5 3 |
| 1.2567 | 1670 | 30WCrV17-2 / X 30 WCrV 5 3 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.2678 | 1670 | X45CoCrWV5-5/X 45 CoCrWV 5 5 |
| 1.2343 | 1770 | X38CrMoV5-1 / X 38 CrMoV 5 1 |
| 1.2344 | 1770 | X40CrMoV5-1 / X 40 CrMoV 5 1 |
| 1.2367 | 1770 | X38CrMoV5-3 / X 38 CrMoV 5 3 |
| 1.2714 | 1770 | 56NiCrMoV7 / 56 NiCrMoV 7 |
| 1.2622 | 2060 | X60WCrMoV9-4 / X 60 WCrMoV 9 4 |
High Speed Steel (before Hardening) (acc. to DIN 17350, ISO 4957)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.3333 | 950 | S 3-3-2 (HS3-3-2) (ABCIII) |
| 1.3343 | 950 | S 6-5-2 (HS6-5-2) (DMo5) |
| 1.3344 | 950 | S 6-5-3 (HS6-5-3) (EMo5V3) |
| 1.3346 | 950 | S 2-9-1 (HS2-9-1) (BMo9) |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.3348 | 950 | S 2-9-2 (HS2-9-2) (BMo9V) |
| 1.3207 | 1020 | S 10-4-3-10 (HS10-4-3-10) (EW9Co10) |
| 1.3243 | 1020 | S 6-5-2-5 (HS6-5-2-5) (EMo5Co5) |
High-Speed Steel, hardened; Hardened Steel; Cold Work Tool Steel, hardened
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.2208 | (52HRc) | 31CrV2 / 31 CrV 3 |
| 1.2248 | (55HRc) | 38SiCrV6 |
| 1.2241 | (56HRc) | 51 CrV4 / 51 CrMnV 4 |
| 1.2767 | (56HRc) | X45NiCrMo4 / X 45 NiCrMo 4 |
| 1.2103 | (58HRc) | 58SiCr8 |
| 1.2249 | (58HRc) | 45SiCrV6 |
| 1.2319 | (59HRc) | X64CrMo14 |
| 1.2361 | (59HRc) | X91CrMoV18 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.2101 | (61HRc) | 62SiMnCr4 |
| 1.2242 | (61HRc) | 59CrV4 |
| 1.2243 | (62HRc) | 61CrSiV5 |
| 1.3343 | (62HRc) | HS6-5-2 / S 6-5-2 (DMo5) |
| 1.3344 | (64HRc) | HS6-5-3 / S 6-5-3 (EMo5V3) |
| 1.3243 | (64HRc) | HS6-5-2-5 / S 6-5-2-5 (EMo5Co5) |
| 1.3344 | (64HRc) | ASP 2023 PM |
Heatresisting Structural Steel (acc. to DIN EN 10216-2, DIN 17175)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.5419 | 590 | 22Mo4 / 22 Mo 4 |
| 1.0482 | 610 | 19Mn5 / 19 Mn 5 |
| 1.5404 | 690 | 21MoV5-3 / 21 MoV 5 3 |
| 1.7242 | 690 | 16CrMo4 / 16 CrMo 4 |
| 1.7337 | 690 | 16CrMo4-4 / 16 CrMo 4 4 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.4922 | 830 | X20CrMoV12-1 / X 20 CrMoV 12 1 |
| 1.5406 | 830 | 17MoV8-4 / 17 MoV 8 4 |
| 1.8070 | 830 | 21CrMoV5-11 / 21 CrMoV 5 11 |
| 1.6513 | 880 | 28NiCrMo4 / 28 NiCrMo 4 |
| 1.7711 | 1000 | 40CrMoV4-7 / 40 CrMoV 4 7 |
Tough at Subzero Steel (acc. to DIN EN 10272, DIN 17440)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.5622 | 640 | 14Ni6 / 14 Ni 6 |
| 1.1169 | 690 | 20Mn6 / 20 Mn 6 |
| 1.4311 | 740 | X2CrNiN18-10 / X 2 CrNiN 18 10 |
| 1.5633 | 740 | 24Ni8 / 24 Ni 8 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.6903 | 740 | X10CrNiTi18-10 / X 10 CrNiTi 18 10 |
| 1.7219 | 740 | 26CrMo4 / 26 CrMo 4 |
| 1.4406 | 780 | X2CrNiMoN17-12-2 |
Valve Steel, treated (acc. to DIN 17480, DIN EN 10090, ISO 683-15)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.5122 | 930 | 37MnSi5 / 37 MnSi 5 |
| 1.3817 | 950 | X40MnCr18 / X 40 MnCr 18 |
| 1.2731 | 980 | X50NiCrWV13-13 |
| 1.4873 | 1000 | X45CrNiW18-9 / X 45 CrNiW 18 9 |
| 1.4718 | 1100 | X45CrSi9-3 / X 45 CrSi 9 3 |
| 1.4731 | 1100 | X40CrSiMo10-2 / X 40 CrSiMo 10 2 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.4747 | 1130 | X80CrNiSi20 / X 80 Cr NiSi 20 |
| 1.4875 | 1150 | X55CrMnNiN20-8 |
| 1.4748 | 1200 | X85CrMoV18-2 |
| 1.4871 | 1200 | X53CrMnNiN21-9 |
| 1.4785 | 1250 | X60CrMnMoVNbN21-10 |
Spring Steel (naturally hard, soft annealed) (acc. to DIN 17221, 17222, DIN EN 10132-4, ISO 683-14)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.0900 | 860 | 38Si6 / 38 Si 6 |
| 1.5024 | 860 | 46Si7 / 46 Si 7 |
| 1.5028 | 910 | 65Si7 / 66 Si 7 |
| 1.0908 | 980 | 60SiMn5 / 60 SiMn 5 |
| 1.5026 | 980 | 55Si7 / 55 Si 7 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.1231 | 1010 | Ck 67 (C67E) |
| 1.8159 | 1045 | 51CrV4 / 50 CrV 4 |
| 1.7701 | 1045 | 51CrMoV4 / 51 CrMoV 4 |
| 1.7176 | 1045 | 55Cr3 / 55 Cr 3 |
| 1.7138 | 1080 | 52MnCrB3 / 52 MnCrB 3 |
Spring Steel (spring-hard, hardened) (acc. to DIN 17221, 17222, DIN EN 10132-4, ISO 683-14)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.0900 | 1370 | 38Si6 / 38 Si 6 |
| 1.5024 | 1470 | 46Si7 / 46 Si 7 |
| 1.0908 | 1520 | 60SiMn5 / 60 SiMn 5 |
| 1.5028 | 1570 | 65Si7 / 66 Si 7 |
| 1.8159 | 1620 | 51CrV4 / 50 CrV 4 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.5026 | 1670 | 55Si7 / 55 Si 7 |
| 1.7701 | 1670 | 51CrMoV4 / 51 CrMoV 4 |
| 1.7138 | 1720 | 52MnCrB3 / 52 MnCrB 3 |
| 1.7176 | 1720 | 55Cr3 / 55 Cr 3 |
| 1.1231 | 1770 | Ck 67 (C67E) |
Non-magnetizable Steel (acc. to SEW 390)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.3952 | 690 | X2CrNiMoN18-14-3 |
| 1.3953 | 690 | X2CrNiMo18-15 |
| 1.3958 | 690 | X5CrNi18-11 |
| 1.3941 | 830 | X4CrNi18-13 |
| 1.3962 | 830 | X15CrNiMn12-10 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.3805 | 900 | X35Mn18 |
| 1.3964 | 930 | X2CrNiMnMoNNb21-16-5-3 |
| 1.3949 | 980 | X50MnCrNiN18-13 |
| 1.3813 | 1030 | X40MnCrN19 |
| 1.3819 | 1180 | X50MnCrV20-14 |
Heat-resistant Steel (acc. to DIN EN 10095)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.5310 | 500 | 8SiTi4 / 8 SiTi 4 |
| 1.4713 | 620 | X10CrAl7 (X10CrAlSi7) |
| 1.4700 | 640 | 8CrSi7-7 / 8 CrSi 7 7 |
| 1.4724 | 650 | X10CrAl13 / X 10 CrAlSi 13 |
| 1.4712 | 690 | X10CrSi6 / X 10 CrSi 6 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.4722 | 690 | X10CrSi13 / X 10 CrSi 13 |
| 1.4741 | 690 | X10CrSi18 / X 10 CrSi 18 |
| 1.4742 | 700 | X10CrAl18 / X10 CrAlSi 18 |
| 1.4762 | 720 | X10CrAl24 / X 10 CrAlSi 25 |
Heat-resistant Steel, austenitic (acc. to DIN EN 10095)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.4828 | 750 | X15CrNiSi20-12 / X 15 CrNiSi 20 12 |
| 1.4833 | 750 | X7CrNi23-14 / X 12 CrNi 24 12 |
| 1.4845 | 750 | X12CrNi25-21 / X 12 CrNi 25 21 |
| 1.4861 | 750 | X10NiCr32-20 / X 10 NiCr 32 20 |
| 1.4876 | 750 | X10NiCrAlTi32-20 (Incoloy 800) |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.4878 | 750 | X12CrNiTi18-9 / X 10 CrNiTi 18 10 |
| 1.4885 | 750 | X12CrNiMoNb20-15 |
| 1.4841 | 800 | X15CrNiSi25-20 / X 15 CrNiSi 25 21 |
| 1.4864 | 800 | X12NiCrSi36-16 / X 12 NiCrSi 35 16 |
| 1.4821 | 850 | X20CrNiSi25-4 / X 20CrNiSi 25 4 |
Stainless and acid resistant steels
Stainless Steel, ferritic (acc. to DIN EN 10088-2+3, DIN 17440)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.4512 | 560 | X6CrTi12 / X 6 CrTi 12 |
| 1.4510 | 600 | X6CrTi17 / X 6 CrTi 17 |
| 1.4511 | 600 | X6CrNb17 / X 6 CrNb 17 |
| 1.4000 | 630 | X6Cr13 / X 6 Cr 13 |
| 1.4016 | 630 | X6Cr17 / X 6 Cr 17 |
| 1.4105 | 630 | X6CrMoS17 / X 4 CrMoS 18 (sulfurized) |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.4521 | 650 | X2CrMoTi18-2 / X 2 CrMoTi 18 2 |
| 1.4113 | 660 | X6CrMo17-1 / X 6 CrMo 17 1 |
| 1.4002 | 700 | X6CrAl13 / X 6 CrAl 13 |
| 1.4024 | 720 | X15Cr13 / X 15 Cr 13 |
| 1.4006 | 730 | X10Cr13 / X 10 Cr 13 |
| 1.4104 | 730 | X12CrMoS17 / X 12 CrMoS 17 (sulfurized) |
Stainless Steel, ferritic, heat-treated
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.4000 | 700 | X6Cr13 / X 6 Cr 13 |
| 1.4006 | 850 | X10Cr13 / X 10 Cr 13 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.4005 | 850 | X12CrS13 / X 12 CrS 13 |
Stainless Steel, martensitic (acc. to DIN EN 10088-2+3, DIN 17440)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.4021 | 760 | X20Cr13 / X 20 Cr 13 |
| 1.4028 | 800 | X30Cr13 / X 30 Cr 13 |
| 1.4031 | 800 | X39Cr13 / X 39 Cr 13 |
| 1.4034 | 800 | X46Cr13 / X 46 Cr 13 |
| 1.4037 | 840 | X65Cr13 / X 65 Cr 13 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.4112 | 880 | X90CrMoV18 / X 90 CrMoV 18 |
| 1.4109 | 900 | X70CrMo15 / X 65 CrMo 14 |
| 1.4116 | 900 | X45CrMoV15 / X 45 CrMoV 15 |
| 1.4057 | 950 | X17CrNi16-2 / X 20 CrNi 17 2 |
| 1.4125 | 960 | X105CrMo17 / X 105 CrMo 17 |
Stainless Steel, martensitic, heat-treated
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.4024 | 800 | X15Cr13 |
| 1.4104 | 850 | X14CrMoS17 |
| 1.4021 | 950 | X20Cr13 / X 20 Cr 13 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.4122 | 950 | X35CrMo17 / X 35 CrMo 17 |
| 1.4028 | 1000 | X30Cr13 / X 30 Cr 13 |
Stainless Steel, austenitic (acc. to DIN EN 10088-2+3, DIN 17440)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.4306 | 680 | X2CrNi19-11 / X 2 CrNi 18 9 |
| 1.4433 | 690 | X2CrNiMo18-14 |
| 1.4435 | 700 | X2CrNiMo18-14-3 |
| 1.4300 | 700 | X12CrNi18-8 (V2A Normal) |
| 1.4301 | 700 | X5CrNi18-10 (V2A Supra) |
| 1.4541 | 700 | X6CrNiTi18-10 (V2A Extra) |
| 1.4404 | 700 | X2CrNiMo17-12-2 (316L) |
| 1.4436 | 700 | X3CrNiMo17-13-3 (316) |
| 1.4303 | 700 | X4CrNi18-12 |
| 1.4401 | 700 | X5CrNiMo17-12-2 (V4A-Supra, 316) |
| 1.4571 | 700 | X6CrNiMoTi17-12-2 (V4A-Extra) |
| 1.4539 | 730 | X2NiCrMoCu25-20-5 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.4505 | 740 | X4NiCrMoCuNb20-18-2 |
| 1.4550 | 740 | X6CrNiNb18-10 (347) |
| 1.4573 | 740 | X10CrNiMoTi18-12 |
| 1.4580 | 740 | X6CrNiMoNb17-12-2 (V4A X-Extra) |
| 1.4305 | 750 | X8CrNiS18-9 / X 10 CrNiS 18 9 (sulfurized) |
| 1.4310 | 750 | X10CrNi18-8 / X 12 CrNi 17 7 |
| 1.4311 | 760 | X2CrNiN18-10 (V2A Nitro) |
| 1.4406 | 800 | X2CrNiMoN17-11-2 (V4A Nitro, 316LN) |
| 1.4529 | 850 | X1CrNiMoCuN25-20-7 |
| 1.4462 | 880 | X2CrNiMoN22-5-3 (ferrit.-austen.) |
| 1.4460 | 880 | X3CrNiMoN27-5-2 (ferrite-austen.) |
| 1.4582 | 900 | X4CrNiMoNb25-7 (ferrit.-austen.) |
Stainless Steel with high tensile strength
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.4418 | 1100 | X4CrNiMo16-5-1 |
| 1.4313 | 1100 | X3CrNiMo13-4 / X 4 CrNi 13 4 (quenched and tempered) |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.4542 | 1270 | X5CrNiCuNb16-4 (hardened) |
Cast Steel for general engineering purposes (acc. to DIN 1681, ISO 3755 und DIN EN 10213-1+3, DIN 17182)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.0420 | 450 | GS-38 (GE200) |
| 1.0446 | 500 | GS-45 (GE240) |
| 1.0552 | 600 | GS-52 (GE260) |
| 1.0558 | 650 | GS-60 (GE300) |
| 1.5919 | 650 | GS-15CrNi6 / GS-15 CrNi 6 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.1131 | 650 | G17Mn5 / GS-16Mn5 |
| 1.1120 | 700 | G20Mn5 / GS-20 Mn 5 |
| 1.7218 | 1100 | GS-25CrMo4 / GS-25 CrMo 4 |
| 1.7220 | 1200 | GS-34CrMo4 / GS-34 CrMo 4 |
Ferritic Steel Castings with elevated temperature properties (acc. to DIN EN 10213-1+2, DIN 17245)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.0619 | 650 | GP240GH / GS-C 25 |
| 1.5419 | 650 | G20Mo5 / GS-22 Mo 4 |
| 1.7357 | 700 | G17CrMo5-5 / GS-17 CrMo 5 5 |
| 1.4107 | 750 | GX8CrNi12 / G-X 8 CrNi 12 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.7379 | 800 | G17CrMo9-10 / GS-18CrMo 9 10 |
| 1.7706 | 850 | G17CrMoV5-10 / GS-17 CrMoV 5 11 |
| 1.4931 | 950 | G-X23CrMoV12-1 |
Corrosion- and Acidproof Steel Castings Stainless Steel Castings (acc. to DIN EN 10213-1+4, DIN 17445)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.4008 | 780 | GX8CrNi14 / GX7CrNiMo12-1 (ferrit.) |
| 1.4027 | 790 | GX20Cr14 / G-X 20 Cr 14 (ferritic) |
| 1.4059 | 980 | GX22CrNi17 (ferritic) |
| 1.4085 | 980 | GX70Cr29 (SEW 410) |
| 1.4136 | 980 | GX70CrMo29-2 (martensitic) |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.4106 | 1030 | X2CrMoSiS18-2-1 (martensitic) |
| 1.4086 | 1080 | GX120Cr29 (martensitic) |
| 1.4138 | 1080 | GX120CrMo29-2 (martensit.) |
| 1.4313 | 1100 | GX5CrNi13-4 / G-X 5 CrNi 13 4 |
Corrosion- and Acidproof Steel Castings Stainless Steel Castings, austenitic (acc to DIN EN 10213-1+4, DIN 17445)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.4306 | 640 | GX2CrNiN18-9 |
| 1.4308 | 640 | GX5CrNi19-10 / G-X 6 CrNi 18 9 |
| 1.4312 | 640 | GX10CrNi18-8 |
| 1.4408 | 640 | GX5CrNiMo19-11-2 / G-X6CrNiMo18-10 |
| 1.4410 | 640 | X2CrNiMoN25-7-4 |
| 1.4536 | 640 | GX2NiCrMoCuN25-20 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.4552 | 640 | GX5CrNiNb19-11 / G-X 5 CrNiNb 18 9 |
| 1.4581 | 640 | GX5CrNiMoNb19-11-2 |
| 1.4439 | 690 | GX3CrNiMoN17-13-5 |
| 1.4347 | 790 | GXCrNiN26-7 / GX6CrNiN26-7 |
| 1.4569 | 800 | GX2CrNiMnMoNNb21-15-4-3 |
| 1.4469 | 850 | GX2CrNiMoN26-7-4 / G-X2CrNiMoN25-7-4 |
Heatproof Steel Castings (acc. to DIN 17465)
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.4825 | 640 | GX25CrNiSi18-9 |
| 1.4848 | 640 | GX40CrNiSi25-20 |
| 1.4710 | 740 | GX30CrSi6 / G-X 30 CrSi 6 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 1.4729 | 780 | GX40CrSi13 / G-X 40 CrSi 13 |
| 1.4740 | 780 | GX40CrSi17 / G-X 40 CrSi 17 |
| 1.4823 | 780 | GX40CrNiSi27-4 |
Casting
Malleable Cast Iron (acc. to DIN 1692, ISO5922)
| up to max. N/mm² | Designation | |
|---|---|---|
| 0.8135 | 400 | GTS-35-10 / GTS-35 |
| 0.8035 | 400 | GTW-35-04 / GTW-35 |
| 0.8038 | 450 | GTW-S38-12 / GTW-S 38 |
| 0.8040 | 450 | GTW-40-05 / GTW-40 |
| 0.8045 | 500 | GTW-45-07 / GTW-45 |
| 0.8145 | 500 | GTS-45-06 / GTS-45 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 0.8055 | 600 | GTW-55 |
| 0.8155 | 600 | GTS-55-04 / GTS-55 |
| 0.8065 | 700 | GTW-65 |
| 0.8165 | 700 | GTS-65-02 / GTS-65 |
| 0.8170 | 750 | GTS-70-02 / GTS-70 |
| 0.817 | 1000 | GTS-70-02 (quenched and tempered) |
Grey Cast Iron (acc. to DIN 1691, ISO/DIS 185)
| up to max. N/mm² | Designation | |
|---|---|---|
| 0.6010 | 190 | GG-10 |
| 0.6015 | 205 | GG-15 |
| 0.6020 | 230 | GG-20 |
| 0.6025 | 250 | GG-25 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 0.6030 | 275 | GG-30 |
| 0.6035 | 290 | GG-35 |
| 0.6040 | 300 | GG-40 |
Grey Cast Iron, heat treated, extra-short chipping
| up to max. N/mm² | Designation | |
|---|---|---|
| 0.6010 | 700 | GG-10 |
| 0.6015 | 700 | GG-15 |
| 0.6020 | 800 | GG-20 |
| 0.6025 | 800 | GG-25 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 0.6030 | 900 | GG-30 |
| 0.6035 | 1000 | GG-35 |
| 0.6040 | 1000 | GG-40 |
Grey Cast Iron (heat treated)
| up to max. N/mm² | Designation | |
|---|---|---|
| 0.6652 | 220 | GGL-NiMn13-7 |
| 0.6655 | 220 | GGL-NiCuCr15-6-2 |
| 0.6660 | 220 | GGL-NiCr20-2 |
| 0.6676 | 240 | GGL-NiCr30-3 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 0.6678 | 260 | GGL-NiCr35-2 |
| 0.6667 | 280 | GGL-NiSiCr20-5-3 |
| 0.6680 | 280 | GGL-NiSiCr30-5-5 |
Nodular Cast Iron (acc. to DIN 1693)
| up to max. N/mm² | Designation | |
|---|---|---|
| 0.7033 | 400 | GGG-35.3 |
| 0.7040 | 500 | GGG-40 |
| 0.7043 | 500 | GGG-40.3 |
| 0.7050 | 600 | GGG-50 |
| 0.7060 | 700 | GGG-60 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 0.7070 | 750 | GGG-70 |
| 0.7080 | 850 | GGG-80 |
| 0.7070 | 1000 | GGG-70 (quenched and tempered) |
| 0.7080 | 1000 | GGG-80 (quenched and tempered) |
Nodular Cast Iron, austenitic (acc. to DIN 1694, ISO 2892)
| up to max. N/mm² | Designation | |
|---|---|---|
| 0.7683 | 420 | GGG-Ni35 |
| 0.7670 | 450 | GGG-Ni22 |
| 0.7652 | 470 | GGG-NiMn13-7 |
| 0.7673 | 480 | GGG-NiMn23-4 |
| 0.7659 | 480 | GGG-NiCrNb20-2 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 0.7660 | 480 | GGG-NiCr20-2 |
| 0.7676 | 480 | GGG-NiCr30-3 |
| 0.7688 | 500 | GGG-NiSiCr35-5-2 |
| 0.7665 | 500 | GGG-NiSiCr20-5-2 |
| 0.7680 | 500 | GGG-NiSiCr30-5-5 |
Meehanite (Chilled White) Iron
| up to max. N/mm² | Designation | |
|---|---|---|
| GD-260 | 500 | GD-260 |
| GF-150 | 500 | GF-150 |
| SF-400 | 700 | SF-400 |
| up to max. N/mm² | Designation | |
|---|---|---|
| SPF-600 | 700 | SPF-600 |
| SH-800 | 1000 | SH-800 |
| SH-1000 | 1000 | SH-1000 |
Nonferrous metals
Copper, non/low alloyed (acc. to DIN 1708, ISO 431)
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.0060 | 250 | E-Cu57 |
| 2.0065 | 250 | E-Cu58 |
| 2.0061 | 300 | E1-Cu58 (Cu-ETP ISO/R 431) |
| 2.0062 | 300 | E2-Cu58 (Cu-FRHC ISO/R 1428) |
| 2.0070 | 300 | SE-Cu |
| 2.0080 | 350 | F-Cu (Cu-FRPT ISO/R 1429) |
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.0076 | 400 | SW-Cu (Cu-DLP ISO/R 1430) |
| 2.0090 | 420 | SF-Cu (Cu-DHP ISO/R 1430) |
| 2.0060.32 | 420 | E-Cu57-F37 |
| 2.0065.32 | 420 | E-Cu58-F37 |
| 2.0070.32 | 420 | SE-Cu-F37 |
Electrolytic Copper
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.0050 | 400 | KE-Cu (Cu-CATH ISO/DR 2311) |
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.0040 | 400 | OF-Cu |
Wrought Copper Alloys, low alloyed, not age-hardenable (acc. to DIN 17666, ISO 1336)
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.1356 | 350 | CuMn3 |
| 2.1522 | 350 | CuSi2Mn |
| 2.1525 | 350 | CuSi3Mn |
| 2.1265 | 400 | CuCd0.5 |
| 2.1491 | 400 | CuAsP (SB-Cu) |
| 2.1160 | 400 | CuPb1P |
| 2.1498 | 400 | CuSP |
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.1546 | 400 | CuTeP (SF-CuTe) |
| 2.1203 | 420 | CuAg0.1 |
| 2.1191 | 420 | CuAg0.1P |
| 2.1192 | 420 | CuAg0.03P |
| 2.1322 | 420 | CuMg0.4 |
| 2.0205 | 460 | CuZn0.5 |
| 2.1310 | 600 | CuFe2P |
Wrought Copper Alloys, low alloyed, age-hardenable, but not yet age-hardened
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.1580 | 500 | CuZr (cured) |
| 2.1293 | 700 | CuCrZr (hardened) |
| 2.0853 | 720 | CuNi1.5Si (age-hardened) |
| 2.0857 | 950 | CuNi3Si (age-hardened) |
| 2.0850 | 1000 | CuNi2Be (hardened) |
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.1285 | 1000 | CuCo2Be (cured) |
| 2.1245 | 1380 | CuBe1.7 (cured) |
| 2.1247 | 1480 | CuBe2 (cured) |
| 2.1248 | 1480 | CuBe2Pb (cured) |
Wrought Copper Alloys, low alloyed, age-hardened (acc. to DIN 17666, ISO 1336)
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.0360 | 600 | Ms 60: CuZn40 |
| 2.0370 | 650 | Ms 60Pb1: CuZn38Pb1 |
| 2.0371 | 650 | Ms 60Pb1.5: CuZn38Pb1.5 |
| 2.0372 | 650 | Ms 60Pb: CuZn39Pb0.5 |
| 2.0550 | 650 | CuZn40Al2 |
| 2.0380 | 700 | Ms 58: CuZn39Pb2 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.0401 | 700 | (A-)Ms 58: CuZn39Pb3 |
| 2.0410 | 700 | Ms 56: CuZn44Pb2 |
| 2.0525 | 700 | CuZn38SnAl |
| 2.0561 | 700 | CuZn40Al1 |
| 2.0402 | 710 | (Ms 58): CuZn40Pb2 |
Brass, long chipping (mild, ductile) (acc. to DIN 17660, ISO 426-1,-2)
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.0220 | 420 | Ms 95: CuZn5 |
| 2.0230 | 450 | Ms 90: CuZn10 |
| 2.0240 | 550 | Ms 85: CuZn15 |
| 2.0250 | 600 | Ms 80: CuZn20 |
| 2.0261 | 620 | Ms 72: CuZn28 |
| 2.0265 | 620 | Ms 70: CuZn30 |
| 2.0280 | 650 | Ms 67: CuZn33 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.0330 | 650 | Ms 63Pb: CuZn36Pb1 |
| 2.0331 | 650 | CuZn36Pb1.5 |
| 2.0375 | 650 | CuZn36Pb3 |
| 2.0332 | 650 | CuZn37Pb0.5 |
| 2.0335 | 700 | (Ms 63): CuZn36 |
| 2.0321 | 700 | Ms 63: CuZn37 |
Brass-Castings, Copper-Zinc-Cast-Alloys (acc. to DIN 1709, ISO 1338)
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.0241.01 | 340 | G-CuZn15 |
| 2.0290.01 | 360 | G-CuZn33Pb |
| 2.0340.02 | 500 | GK-CuZn37Pb |
| 2.0340.05 | 500 | GD-CuZn37Pb |
| 2.0590.01 | 500 | G-CuZn40Fe |
| 2.0590.03 | 530 | GZ-CuZn40Fe |
| 2.0591.02 | 580 | GK-CuZn38Al |
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.0492.02 | 700 | GK-CuZn15Si4 |
| 2.0492.05 | 750 | GD-CuZn15Si4 |
| 2.0596.01 | 800 | G-CuZn34Al2 |
| 2.0598.01 | 900 | G-CuZn25Al5 |
| 2.0598.02 | 900 | GK-CuZn25Al5 |
| 2.0598.03 | 900 | GZ-CuZn25Al5 |
Copper-Zinc-Special-Alloys (acc. to DIN 17660, ISO 426)Special brass (tough); special copper-zinc alloy, (according to DIN 17660, ISO 426)
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.0530 | 550 | CuZn39Sn |
| 2.0515 | 580 | CuZn30Al |
| 2.0525 | 580 | CuZn38SnAl |
| 2.0460 | 600 | CuZn20Al2 (SoMs76) |
| 2.0510 | 620 | CuZn37Al1 (SoMs58Al1) |
| 2.0490 | 650 | CuZn31Sn1 (SoMs68) |
| 2.0540 | 650 | CuZn35Ni2 (SoMs59) |
| 2.0561 | 650 | CuZn40Al1 (SoMs58Al1) |
| 2.0572 | 650 | CuZn40Mn2 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.0580 | 650 | CuZn40Mn1Pb (SoMs58Pb) |
| 2.0470 | 700 | CuZn28Sn1 (SoMs71) |
| 2.0530 | 700 | CuZn38Sn1, CuZn39Sn (SoMs 60) |
| 2.0550 | 700 | CuZn40Al2 (SoMs58Al2) |
| 2.0571 | 700 | CuZn40Ni (SoMs58) |
| 2.0730 | 700 | CuNi12Zn24 |
| 2.0790 | 800 | CuNi18Zn19Pb1 |
| 2.0500 | 900 | CuZn23Al6Mn4Fe3 |
Copper-Nickel-Zinc Alloys, Nickel-Silver (acc. to DIN 17663, ISO 430)
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.0780 | 650 | CuNi12Zn30Pb1 |
| 2.0790 | 700 | CuNi18Zn19Pb1 |
| 2.0771 | 720 | CuNi7Zn39Mn5Pb3 |
| 2.0730 | 750 | CuNi12Zn24 (Ns6512) |
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.0740 | 800 | CuNi18Zn20 (Ns6218) |
| 2.0742 | 820 | CuNi18Zn27 |
| 2.0798 | 900 | CuNi25Zn15 |
Copper-Nickel Alloys (acc. to DIN 17664, ISO 429)
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.0802 | 350 | CuNi2 |
| 2.0855 | 500 | CuNi2Si |
| 2.0854 | 500 | CuNi3Si |
| 2.0862 | 500 | CuNi5Fe |
| 2.0830 | 480 | CuNi25 |
| 2.0881 | 500 | CuNi23Mn |
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.0872 | 500 | CuNi10Fe1Mn |
| 2.0890 | 550 | CuNi30Mn |
| 2.0882 | 550 | CuNi30Mn1Fe |
| 2.0883 | 600 | CuNi30Fe2Mn2 |
| 2.0842 | 600 | CuNi44Mn1 |
| 2.0875 | 760 | CuNi9Sn2 |
Gun Metal, Red Brass, short chipping
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.1098.01 | 280 | G-CuSn2ZnPb |
| 2.1096.01 | 280 | Rg 5: G-CuSn5ZnPb |
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.1093 | 350 | Rg 6: G-CuSn6ZnNi |
| 2.1090.01 | 350 | Rg 7: G-CuSn7ZnPb |
Gun Metal, Red Brass, long chippingGunmetal, long-chipping (according to DIN 1705)
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.1086.01 | 300 | Rg 10: G-CuSn10Zn |
Tin-Bronzes, long chipping (tough) Wrought Copper-Tin Alloys (acc. to DIN 17662, ISO 427)Tin bronze, long-chipping (tough) Wrought copper-tin alloys (to DIN 17662, ISO 427)
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.1020.30 | 610 | CuSn6-F49 |
| 2.1030.30 | 650 | CuSn8-F54 |
| 2.1016 | 700 | CuSn4 (SnBz4) |
| 2.1020 | 750 | CuSn6 (SnBz6) |
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.1030 | 780 | CuSn8 (SnBz8) |
| 2.1080 | 880 | CuSn6Zn6 (MSnBz6) |
| 2.1020.34 | 900 | CuSn6-F80 |
| 2.1030.34 | 950 | CuSn8-F85 |
Tin-Bronze, Copper-Tin-Alloy-Castings (acc. to DIN 1705, ISO 1338)
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.1052.01 | 520 | G-CuSn12 (G-SnBz12) |
| 2.1056.01 | 520 | G-CuSn14 (G-SnBz14) |
| 2.1061.01 | 520 | G-CuSn12Pb |
| 2.1050.01 | 540 | G-CuSn10 (G-SnBz10) |
| 2.1060.01 | 560 | G-CuSn12Ni |
| up to max. N/mm² | Designation | |
|---|---|---|
| PAN-Bz10 | 560 | PAN bronze, soft, Sn 10% |
| PAN-Bz12 | 560 | PAN bronze, soft, Sn 12% |
| PAN-Bz14 | 560 | PAN bronze, soft, Sn 14% |
| PAN-Bz16 | 560 | PAN bronze, soft, Sn 16% |
Bronzes, short chipping (hard); Copper-Aluminium Alloys (Alu-Bronze) (acc. to DIN 17665, ISO 428)
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.0916 | 650 | CuAl5 (AlBz5) |
| 2.0918 | 650 | CuAl5As |
| 2.0920 | 650 | CuAl8 (AlBz8) |
| 2.0932 | 700 | CuAl8Fe3 (AlBz8Fe) |
| 2.0960 | 700 | CuAl9Mn2 (AlBz9Mn) |
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.0971 | 800 | CuAl9Ni3Fe2 |
| 2.0936 | 800 | CuAl10Fe3Mn2 (AlBz10Fe) |
| 2.0966 | 850 | CuAl10Ni5Fe4 (AlBz10Ni) |
| 2.0978 | 950 | CuAl11Ni6Fe5 (AlBz11Ni) |
Aluminium-Bronze, Copper-Alu-Cast-Alloy (acc. to DIN 1714, ISO 1338)
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.0962.02 | 600 | GK-CuAl8Mn |
| 2.0940.01 | 650 | G-CuAl10Fe |
| 2.0970.02 | 700 | GK-CuAl9Ni |
| 2.0975.02 | 700 | G-CuAl10Ni |
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.0980.01 | 800 | G-CuAl11Ni |
| 2.0980.02 | 800 | GK-CuAl11Ni |
| 2.0980.03 | 850 | GZ-CuAl11Ni |
Copper-Lead-Tin Alloy Castings (high leaded Bronzes) (acc. to DIN 1716, ISO 1338)
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.1166.09 | 240 | G-CuPb22Sn (G-PbBz25) |
| 2.1188 | 250 | CuPb20Sn5 (ISO 1338) |
| 2.1170 | 260 | CuPb9Sn5 (ISO 1338) |
| 2.1182 | 270 | CuPb15Sn8 (ISO 1338) |
| 2.1176 | 280 | CuPb10Sn10 (ISO 1338) |
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.1188.01 | 280 | G-CuPb20Sn (G-SnPbBz20) |
| 2.1182.03 | 320 | GZ-CuPb15Sn (G-SnPbBz15) |
| 2.1176.04 | 340 | GC-CuPb10Sn (G-SnPbBz10) |
| 2.1170.01 | 350 | G-CuPb5Sn (G-SnPbBz5) |
Complex-Bronzes (Aeterna-, Caro-, PAN-, Zollernbronze)
| up to max. N/mm² | Designation | |
|---|---|---|
| 3740 | 800 | Aeterna bronze 3740 |
| 3745 | 800 | Aeterna bronze 3745 |
| 3805 | 850 | Aeterna bronze 3805 |
| hh | 700 | Caro bronze semi-hard |
| h | 800 | Caro bronze hard |
| xh | 850 | Caro bronze extra hard |
| PAN-SoBz | 850 | PAN special cast bronze |
| -SoMs140 | 600 | PAN special brass, cast alloy. Cu-Zn |
| up to max. N/mm² | Designation | |
|---|---|---|
| -Lead-Bz15 | 700 | PAN cast lead bronze with 15% Pb |
| -SoMs210 | 800 | PAN special brass, cast alloy. Cu-Zn |
| -AlMBz220 | 900 | PAN cast bronze Cu-Al |
| EBz | 900 | Zollern bronze similar to 2.0971 |
| EBG2 | 900 | Zollern bronze similar to G-CuAl9Ni7 |
| TZB28 | 1000 | Zollern bronze Cu-Al-Fe-Leg. |
| TZB36 | 1250 | Inch bronze Cu-Al-Fe-Leg. |
Ampco Alloys (Cu-Al-Fe-Alloys)
| up to max. N/mm² | Designation | |
|---|---|---|
| A-Bz8 | 650 | AMPCO 8 |
| A-Bz12 | 700 | AMPCO 12 |
| A-Bz15 | 730 | AMPCO 15 |
| A-Bz16 | 750 | AMPCO 16 |
| A-Bz18 | 800 | AMPCO 18 |
| up to max. N/mm² | Designation | |
|---|---|---|
| A-Bz20 | 900 | AMPCO 20 |
| A-Bz21 | 1050 | AMPCO 21 |
| A-Bz22 | 1130 | AMPCO 22 |
| A-Bz25 | 1280 | AMPCO 25 |
| A-Bz26 | 1450 | AMPCO 26 |
Aluminum, magnesium, tin, cast alloys
Pure Aluminium, long chipping (acc.to DIN 1712)
| up to max. N/mm² | Designation | |
|---|---|---|
| 3.0280 | 100 | Al99.8H |
| 3.0400 | 120 | Al99,99R |
| 3.0305 | 120 | Al99,9 |
| 3.0250 | 130 | Al99.5H |
| up to max. N/mm² | Designation | |
|---|---|---|
| 3.0255 | 140 | Al99.5 |
| 3.0256 | 140 | E-AlH |
| 3.3308 | 300 | Al99.9Mg0.5 |
Wrought Alu-Alloys, long chipping (acc. to DIN 1725)
| up to max. N/mm² | Designation | |
|---|---|---|
| 160 | 30.515 | AlMn1 |
| 210 | 30.517 | AlMnCu |
| 210 | 33.315 | AlMg1 |
| 240 | 33.316 | AlMg1.5 |
| 250 | 33.527 | AlMg2Mn0.8 |
| 290 | 33.211 | AlMg1SiCu |
| 290 | 33.523 | AlMg2.5 |
| 300 | 33.535 | AlMg3 |
| 320 | 35.555 | AlMg5 |
| 350 | 32.315 | AlMgSi1 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 350 | 33.206 | AlMgSi0.5 |
| 400 | 31.325 | AlCuMg1 |
| 400 | 31.645 | AlCuMgPb |
| 450 | 31.355 | AlCuMg2 |
| 460 | 34.345 | AlZnMgCu0.5 |
| 500 | 30.516 | S-AlMn |
| 500 | 30.615 | AlMgSiPb |
| 520 | 34.365 | AlZnMgCu1.5 |
| 600 | 30.525 | AlMn1Mg0.5 |
Alu-Cast-Alloys, Al-Si-Alloys up to 0,5% Si (acc. to DIN 1725, ISO/DIS 3522)
| up to max. N/mm² | Designation | |
|---|---|---|
| 3.3541.01 | 190 | G-AlMg3 |
| 3.3541.02 | 200 | GK-AlMg3 |
| 3.3541.09 | 200 | GF-AlMg3 |
| 3.3542 | 200 | GB-AlMg3 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 3.3562 | 220 | GB-AlMg5 |
| 3.3561.01 | 220 | G-AlMg5 |
| 3.3561.02 | 240 | GK-AlMg5 |
| 3.3292.05 | 300 | GD-AlMg9 |
Al-Si-Alloys 0,5 up to 10% Si (acc. to DIN 1725, ISO/DIS 3522)
| up to max. N/mm² | Designation | |
|---|---|---|
| 3.3241.01 | 190 | G-AlMg3Si |
| 3.3241.02 | 200 | GK-AlMg3Si |
| 3.2341.01 | G-AlSi5Mg | G-AlSi5Mg |
| 3.2131 | 230 | G-AlSi5Cu1 |
| 3.2151.02 | 240 | GK-AlSi6Cu4 |
| 3.2152 | 240 | GD-AlSi6Cu4 |
| 3.2163.02 | 240 | GK-AlSi9Cu3 |
| 3.2134 | 240 | G-AlSi5Cu1Mg |
| 3.3241.63 | 280 | GF-AlMg3Si-wa |
| up to max. N/mm² | Designation | |
|---|---|---|
| 3.2153 | 300 | G-AlSi7Cu3 |
| 3.2161 | 300 | G-AlSi8Cu3 |
| 3.2382.05 | 300 | GD-AlSi10Mg |
| 3.2162 | 310 | GD-AlSi8Cu3 |
| 3.2341.62 | 320 | GK-AlSi5Mg-wa |
| 3.2163.05 | 310 | GD-AlSi9Cu3 |
| 3.2371.63 | 340 | GF-AlSi7Mg-wa |
| 3.2373.61 | 340 | G-AlSi9Mg-wa |
Al-Si-Alloys 10 up to 15% Si (acc. to DIN 1725, ISO/DIS 3522)
| up to max. N/mm² | Designation | |
|---|---|---|
| 3.2581.01 | 200 | G-AlSi12 |
| 3.2581.02 | 230 | GK-AlSi12 |
| 3.2383.01 | 230 | G-AlSi10Mg (Cu) |
| 3.2211.02 | 230 | GK-AlSi11 |
| 3.2583.01 | 240 | G-AlSi12 (Cu) |
| up to max. N/mm² | Designation | |
|---|---|---|
| 3.2381.01 | 240 | G-AlSi10Mg |
| 3.2582.05 | 280 | GD-AlSi12 |
| 3.2982.05 | 300 | GD-AlSi12 (Cu) |
| 3.2381.61 | 320 | G-AlSi10Mg-wa |
Al-Si-Alloys over 15% Si (Piston-, Engine Block-Alloy)
| up to max. N/mm² | Designation | |
|---|---|---|
| Y-alloy 3.1754 | 350 | GK-AlZn10Si8Mg |
| 400 | G-AlSi12CuNiMg | |
| 400 | G-AlSi17Cu4Mg | |
| 400 | G-AlSi18 | |
| 450 | GK-AlSi18CuNiMg | |
| 500 | G-AlSi21CuNiMg |
| up to max. N/mm² | Designation | |
|---|---|---|
| Y-alloy 3.1754 | 500 | GK-AlMg5Si(Cu,Mn) |
| 500 | GK-AlSi25CuNiMg | |
| 500 | GK-AlCu4Ni2Mg | |
| 500 | GK-AlCu5Ni1.5 | |
| 700 | Titanal, Duralcan (aluminum special alloy, abrasive) |
Alu-Cast-Alloys, high strength (acc. to DIN 1725, ISO/DIS 3522)
| up to max. N/mm² | Designation | |
|---|---|---|
| 3.1841.63 | 380 | G-AlCu4Ti-ta |
| 3.1841.61 | 380 | G-AlCu4Ti-wa |
| 3.1841.62 | 400 | GK-AlCu4Ti-wa |
| 3.1841.64 | 400 | GK-AlCu4Ti-ta |
| up to max. N/mm² | Designation | |
|---|---|---|
| 3.1371.41 | 400 | G-AlCu4TiMg-ka |
| 3.1371.42 | 420 | GK-AlCu4TiMg-ka |
| 3.1371.45 | 420 | GF-AlCu4TiMg-ka |
Magnesium Alloys (acc. to DIN 1729 Teil 2, ISO/R 121-122)
| up to max. N/mm² | Designation | |
|---|---|---|
| 3.5812.01 | 220 | G-MgAl8Zn1 (AZ 81) |
| 3.5912.01 | 220 | G-MgAl9Zn1 (AZ 91) |
| 3.5662.05 | 230 | GD-MgAl6 |
| 3.5662.01 | 240 | G-MgAl6 (A 6) |
| 3.5612.05 | 240 | GD-MgAl6Zn1 (AZ 61) |
| 3.5105.91 | 240 | G-MgTh3Zn2Zr1 (ZT 1) |
| 3.5101.91 | 240 | G-MgZn4SE1Zr1 (RZ 5) |
| up to max. N/mm² | Designation | |
|---|---|---|
| 3.5912.05 | 250 | GD-MgAl9Zn1 |
| 3.5470.05 | 250 | GD-MgAlSi1 (AS 41) |
| 3.5812.92 | 280 | GK-MgAl8Zn1-ho |
| 3.5106.61 | 280 | G-MgAg3SE2Zr1 (MSR) |
| 3.5102.91 | 290 | G-MgZn5Th2Zr1 (TZ 6) |
| 3.5912.62 | 300 | GK-MgAl9Zn1-wa |
Magnesium-Wrought Alloys (acc. to DIN 1729 Teil 1, DIN 9715)
| up to max. N/mm² | Designation | |
|---|---|---|
| 3.5200.08 | 220 | MgMn2 F22 |
| 3.5200 | 240 | MgMn2 |
| 3.5312.08 | 240 | MgAl3Zn F24 |
| 3.5312 | 240 | MgAl3Zn |
| 3.5612 | 250 | MgAl6Zn |
| up to max. N/mm² | Designation | |
|---|---|---|
| 3.5612.08 | 270 | MgAl6Zn F27 |
| 3.5812.08 | 290 | MgAl8Zn F29 |
| 3.5812 | 290 | MgAl8Zn |
| 3.5812.66 | 310 | MgAl8Zn F31 |
Tin Alloys for pressure die castings (acc. to DIN 1742)
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.3732 | 80 | GD-Sn50SbPb |
| 2.3722 | 90 | GD-Sn60SbPb |
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.3752 | 115 | GD-Sn80Sb |
Zinc Alloys (acc. to DIN 1743)
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.2161.01 | 230 | G-ZnAl6Cu1 (Zamak Z610) |
| 2.2161.02 | 260 | GK-ZnAl5Cu1 (Zamak Z610) |
| 2.2143.01 | 260 | G-ZnAl4Cu3 (Zamak Z430) |
| 2.2143.02 | 280 | GK-ZnAl 4Cu3 (Zamak Z430) |
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.2140.05 | 300 | GD-ZnAl4 (Zamak Z400) |
| 2.2141.05 | 350 | GD-ZnAl4Cu1 (Zamak Z410) |
| 2.2143.05 | 400 | GD-ZnAl4Cu3 |
Nickel, Titanium
Pure Nickel (acc. to DIN 1701, DIN 17740)
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.4066 | 490 | Ni99.2 |
| 2.4017 | 500 | H-Ni99.95 |
| 2.4025 | 500 | H-Ni99 |
| 2.4042 | 500 | Ni99CSi |
| 2.4052 | 500 | Ni99.7Mg |
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.4060 | 500 | Ni99.6 |
| 2.4068 | 500 | LC-Ni99 |
| 2.4061 | 500 | LC-Ni99.6 |
| 2.4060.30 | 650 | Ni99.6-F59 |
| 2.4066.30 | 700 | Ni99.2-F60 |
Nickel-Wrought Alloys, low alloyed (acc. to DIN 17741)
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.4062 | 500 | Ni99.4Fe |
| 2.4106 | 500 | NiMn1 |
| 2.4110 | 500 | NiMn2 |
| 2.4122 | 500 | NiMn3Al |
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.4116 | 500 | NiMn5 |
| 2.1504 LN | 500 | NiAlBz |
| 2.4110.30 | 800 | NiMn2-F74 |
Nickel Alloys, heat-resistant (acc. to DIN 17742, 17743)Nickel alloys, heat resistant, Ni alloys with Cr, Cu (according to DIN 17742, 17743)
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.4366.10 | 650 | LC-NiCu30Fe-F43 |
| 2.4816 | 700 | Inconel-600, NiCr15Fe8 |
| 2.4360 | 800 | Monel-400, (S-)NiCu30Fe |
| 2.4851.40 | 850 | Inconel 601, NiCr23Fe-F60 |
| 2.4951.40 | 900 | Nicrofer 7520, NiCr20Ti-F65 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.4375 | 900 | Monel-K-500, NiCu30Al |
| 2.4630 | 900 | Nimonic-75, NiCr20Ti |
| 2.4646 | 900 | Haynes No. 214, NiCr16Al |
| 2.4665 | 900 | Hastelloy-X, NiCr22Fe18Mo |
Nickel Alloys, high tensile heat-resitant (acc. to DIN 17744, DIN EN 10095)
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.4858.10 | 800 | Incoloy 825, NiCr21Mo-F55 |
| 2.4641.10 | 800 | NIC 42M, NiCr21Mo6Cu-F60 |
| 2.4618.40 | 850 | INCO G, NiCr22Mo6Cu-F62 |
| 2.4819.40 | 900 | INCO C-276, NiMo16Cr15W-F70 |
| 2.4610.40 | 900 | Nicrofer 6125 GT, NiMo16Cr16Ti-F70 |
| 2.4617 | 900 | HastelloyB2, NiMo28 |
| 2.4812 | 900 | Hastelloy-C, NiCr20Mo15 |
| 2.4856 | 900 | Inconel-625, NiCr22Mo9Nb |
| 2.4811 | 900 | NiCr20Mo15 |
| 2.4810 | 950 | Hastelloy-B, NiMo30 |
| 2.4976 | 1180 | NiCr20Mo |
| 2.4654 | 1200 | Waspaloy, NiCr19Co14Mo4Ti |
| 2.4669 | 1200 | Inconel-X-750, NiCr15Fe7TiAl |
| 2.4670 | 1200 | Inconel-713, G-NiCr13Al6MoNb |
| up to max. N/mm² | Designation | |
|---|---|---|
| 2.4982 | 1230 | NiCr20CoMo |
| 2.4983 | 1320 | Udimet-500, NiCr18Co |
| 2.4631 | 1400 | Nimonic-80A, NiCr20TiAl |
| 2.4632 | 1400 | Nimonic-90, NiCr20Co18Ti |
| 2.4634 | 1400 | Nimonic-105, NiCo20Cr15MoAlTi |
| 2.4636 | 1400 | Udimet-700, NiCo15Cr15MoAlTi |
| 2.4662 | 1400 | Nimonic-901, NiCr13Mo6Ti3 |
| 2.4668 | 1400 | Inconel-718, Udimet-630, NiCr19NbMo |
| 2.4670 LN | 1400 | Nimocast-713, G-NiCr13Al6MoNb |
| 2.4674 LN | 1400 | Nimocast-PK24, G-NiCo15Cr10AlTiMo |
| 2.4952.60 | 1400 | Nicrofer 7520Ti, NiCr20TiAl-F100 |
| 2.4969.60 | 1400 | Nimonic-alloy-90, NiCr20Co18Ti-F110 |
| 2.4979 | 1400 | Stellite-21, CoCr28MoNi |
Pure Titanium (acc. to DIN 17850)
| up to max. N/mm² | Designation | |
|---|---|---|
| 3.7025 | 410 | Ti1 / Ti gr.1 |
| 3.7035 | 540 | Ti2 |
| 3.7055 | 590 | Ti3 / Ti99.4 |
| 3.7024.1 LN | 700 | Ti99.5 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 3.7034.1 LN | 700 | Ti99.7 |
| 3.7064.1 LN | 700 | Ti99.2 |
| 3.7065 | 740 | Ti4 |
Titanium Alloys, annealed, low alloyed, medium strength (acc. to DIN 17850 / 17851, ISO 5832-2)
| up to max. N/mm² | Designation | |
|---|---|---|
| 3.7225 | 410 | Ti1Pd / Ti gr.7 |
| 3.7235 | 540 | Ti2Pd |
| 3.7255 | 590 | Ti3Pd |
| 3.7105 | 700 | TiNi0.8Mo0.3 |
| 3.7195.1 | 800 | TiAl3V2.5 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 3.7124 LN | 900 | TiCu2 |
| 3.7114 LN | 980 | TiAl5Sn2 |
| 3.7115 | 980 | TiAl5Sn2.5 |
| 3.7252 | 1000 | Ti gr. 5 eli |
Titanium Alloys over 1000 N/mm² high alloyed, high strength (acc. to DIN 17851 / 17862, ISO 5832-2)
| up to max. N/mm² | Designation | |
|---|---|---|
| 3.7110 | 1050 | TiAl5Fe2.5 |
| 3.7145.7 | 1050 | TiAl6Sn2Zr4Mo2Si |
| 3.7164 LN | 1140 | TiAl6V4-LN |
| 3.7165 | 1140 | TiAl6V4 |
| 3.7175 | 1200 | TiAl6V6Sn2 |
| 3.7144 LN | 1300 | TiAl6Sn2Zr4Mo2 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 3.7154 LN | 1300 | TiAL6Zr5 |
| 3.7174 LN | 1300 | TiAl6V6Sn2-LN |
| 3.7184 LN | 1300 | TiAl4Mo4Sn2-LN |
| 3.7185 | 1300 | TiAl4Mo4Sn2 |
| 3.7194 | 1300 | TiAl5V2.5 |
| 3.7175.7 | 1400 | TiAl6V6Sn2 (6 - 25 mm) |
Plastics
Thermoplastics, soft, long chipping (acc. to DIN 7728)
| up to max. N/mm² | Designation | |
|---|---|---|
| PE | 30 | Polyethylene (Baylon, Hostalen) |
| PP | 40 | Polypropylene (Meraklon, Novolen) |
| PTFE | 40 | Polytetrafluoroethylene (Teflon, Hostaflon) |
| PS | 60 | Polystyrene (Hostyrene, Vestyron) |
| PVC | 60 | Polyvinyl chloride (Hostalit, Vinoflex) |
| up to max. N/mm² | Designation | |
|---|---|---|
| PC | 70 | Polycarbonate (Makrolon) |
| PMMA | 70 | Polymethyl (Plexiglas, Resorit) |
| POM | 70 | Polyformaldehyde (Delrin, Hostaform) |
| PA | 100 | Polyamide (Ultramid, Durethan) |
Duroplastics, Thermosetting Plastics (hard, short chipping) (acc. to DIN 7708)
| up to max. N/mm² | Designation | |
|---|---|---|
| UP | 110 | Unsaturated polyester |
| 120 | Pertinax, Resopal, Resitex | |
| EP | 130 | Epoxy resins |
| up to max. N/mm² | Designation | |
|---|---|---|
| PUR | 140 | Polyurethane, casting resins |
| 300 | Albanite, Ferrocell | |
| Bak | 300 | Bakelite |
Moulded Laminated Plastics (acc. to DIN 7735)
| up to max. N/mm² | Designation | |
|---|---|---|
| PF CP 4 | 300 | Hp 2063 (hard paper) |
| up to max. N/mm² | Designation | |
|---|---|---|
| EP GC 1 | 350 | Hgw 2372 (hard fabric) |
Plastics Fiber-reinforced (acc. to DIN 18820 und 16948)
| up to max. N/mm² | Designation | |
|---|---|---|
| UP | 110 | Unsaturated polyester |
| 120 | Pertinax, Resopal, Resitex | |
| EP | 130 | Epoxy resins |
| up to max. N/mm² | Designation | |
|---|---|---|
| PUR | 140 | Polyurethane, casting resins |
| 300 | Albanite, Ferrocell | |
| Bak | 300 | Bakelite |
Special Material, high strength
Manganese Hard Steels
| up to max. N/mm² | Designation | |
|---|---|---|
| PF CP 4 | 300 | Hp 2063 (hard paper) |
| up to max. N/mm² | Designation | |
|---|---|---|
| EP GC 1 | 350 | Hgw 2372 (hard fabric) |
Titancarbide
| up to max. N/mm² | Designation | |
|---|---|---|
| EP-GF 65 | 300 | CFRP (carbon fiber reinforced) |
| 700 | GRP (glass fiber reinforced) | |
| UP-GF 70 | 700 | GRP (glass fiber reinforced) |
| UP-GF 90 | 900 | GRP (glass fiber reinforced) |
| up to max. N/mm² | Designation | |
|---|---|---|
| EP-GF 78 | 1700 | GRP (glass fiber reinforced) |
| 2000 | AFK (aramid fiber reinforced) | |
| AF-HM | 3000 | AFK (Kevlar, Kermel, Nomex) |
Chilled Cast Iron, Ceramic
| up to max. N/mm² | Designation | |
|---|---|---|
| 13401 | 1400 | X120Mn12 |
| 13402 | 1400 | X110Mn14 |
| up to max. N/mm² | Designation | |
|---|---|---|
| 13405 | 1400 | X90Mn18 |